Success Guide

After 15 days and 4 sleepless nights I become success to create my loving PC build to a hacktintosh. I have passed a lot of times behind the PC and made lots of research and posted on forums and facebook etc and after 15 days or trying I become success with my PC setup.
Now here I came to write the success guide for all the people, I don't want that anyone suffers like me. I will try here to write the full guide.

First of all This is my PC Config:

My Desktop PC Specs Are:

Processor: i5-4460

Graphics: Intel 4600

Ram: (8GB+4GB=12GB) DDR3

Mobo: Gigabyte GA-H97-HD3

HDD: Toshiba

PSU: Thermaltake 450w

Display: 1920x1080

Some informations about this build: 

My big mistake was buying a "Gigabyte GA-H97-HD3" -- I should buy the "Gigabyte GA-H97-D3H" but the mother fucker mobo seller given me this and I didn't regonize while I had purchased. This was my mistake. Okay....So what to do now? 

"Gigabyte GA-H97-HD3" & "Gigabyte GA-H97-D3H" is all the same actually. Just the audio is different. Though that audio is also listed on tonymacs86 buyers guide. So I think this is fully supported actually. 

The processor is a haswell processor and the graphics is Intel 4600. I have to say that this graphics is not natively supported by hackintosh system. And this graphics card dosent supports a VGA cable, You must need a HDMI cable to run graphics here. 

Lets begin how to get started....

The beginning guide:

Mobo Setup: VT-d must be off, Secure boot off, Boot mode UFEI,  Intel Graphics 64MB, DMVT 128MB, Graphics Mode: IGFX for internel graphics only. YOU ARE DONE ! [ USE HDMI  CABLE MUST ]

Making USB Installer:  I followed the tonymacx86 guide and created a installer using "createinstallmeadia" method also used UFEI. 

Clover: I use the latest clover for UFEI. Buy there needs a good config plist to reach the installer for this build. You must use this config to get to the installer: DOWNLOAD

"You will reach to the installer for sure! If you can't then I don't have anything to say...Search another..This post in not for you!! "

After Installing the OSX: 

You are soo happy right now??!! Yes! But you don't have graphics, sounds, ethernate, apple store. This will not work. Sooo Sad!! 

Okay...Now you have to pay attention what I say...

Mounting EFI [Copy Clover to HDD to boot without Pendrive : Its Urgent] : http://www.mediafire.com/download/yagyi8o3trvhkr9/Mounting_.rtf

Restart.

Then download this config: http://www.mediafire.com/download/q3zvfh9vbf5htxx/It_Works_COnfig.zip

Replace using clover configaretor.
DO NOT RESTART IF YOU RESTART YOU WILL LOSE ALL.

Do what has been done in this video: 

https://www.youtube.com/watch?v=F_Q6gmcQgd4

Restart PC...... with this config: http://www.mediafire.com/download/q3zvfh9vbf5htxx/It_Works_COnfig.zip

If the graphics still not works follow this and restart: http://www.mediafire.com/download/apcmbo6fpormw90/Instructions_For_Intel_4600.rtf

Okay Solved??? Yes :D

Now You cant open apple store.
View this tutorial: https://www.youtube.com/watch?v=hRuT8_3ycXc
SMuuid generate with terminal...please.dont copy from imassage fix.

Must install etherenet otherwise this will not work:
http://www.mediafire.com/download/x74fv35vmvmzh1y/RealtekRTL8111.kext.zip

For audio install:
http://www.mediafire.com/download/0j59h0gur39h15m/VoodooHDA-2.8.8.pkg

For modem: